Dell Force10 S5000 Installation Guide - Page 43
Technical Specifications
View all Dell Force10 S5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
7 Technical Specifications NOTE: Operate the product at an ambient temperature not higher than 40°C. CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. NOTE: Replace the battery only with same or equivalent type. Dispose of the batteries according to the manufacturer's instructions. Table 5. Chassis Physical Design Parameter Specifications Height 1.71 inches (43.5 mm) Width 17.4 inches (441 mm) Depth 28 inches (711 mm) Chassis weight with factory-installed components 34 pounds (approx.) (15.42 kg) Rack clearance required • Front: 5 inches (12.7 cm) • Rear: 5 inches (12.7 cm) Table 6. Environmental Parameters Parameter Operating temperature Operating humidity Storage temperature Storage humidity Relative humidity Maximum thermal output Maximum Altitude Table 7. Power Requirements Parameter AC Power supply DC Power supply Maximum current draw per system Maximum power consumption Specifications 32° to 104°F (0° to 40°C) 10 to 85 percent (RH), noncondensing -40° to 158°F (-40° to 70°C) 5 to 95 percent (RH), noncondensing 10 to 85 percent, noncondensing 2388 BTU/hr No performance degradation to 6600 ft Specifications 100 VAC ~ 240 VAC 50/60 Hz -48V ~ -60V VDC 7 A @ 100 VAC 3.5 A @ 200 VAC 700 Watts 43