Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 618

www.dell.com | support.dell.com To return to the default setting, enter no mac cam fib-partition. Parameters 25 50 75 100 slot-number Enter the keyword 25 to set aside 25% of the CAM for MAC address learning. Enter the keyword 50 to set aside 50% of the CAM for MAC address learning. Enter the keyword 75 to set aside 75% of the CAM for MAC address learning. Enter the keyword 100 to set aside 100% of the MAC CAM for MAC address learning. With this configuration, no MAC ACLs are processed. Enter the line card slot number. Range: 0 to 13 for the E1200 0 to 6 for the E600 0 to 5 for the E300 Defaults 75 (75% of the MAC CAM for MAC address learning) Command Modes CONFIGURATION Usage After setting the CAM partition size, the line card resets. Information Related Commands show mac cam Display the current MAC CAM partition values. mac learning-limit c e s Limit the maximum number of MAC addresses (static + dynamic) learned on a selected interface. Syntax Parameters mac learning-limit address_limit [vlan vlan-id] [station-move [dynamic]] [no-station-move [dynamic]] | [dynamic [no-station-move | station-move]] address_limit vlan vlan-id dynamic no-station-move station-move Enter the maximum number of MAC addresses learned. Range: 1 to 1000000 On the E-Series only, enter the keyword followed by the VLAN ID. Range: 1-4094 (OPTIONAL) Enter the keyword dynamic to allow aging of MACs even though a learning limit is configured. (OPTIONAL) Enter the keyword no-station-move to disallow a station move (associate the learned MAC address with the most recently accessed port) on learned MAC addresses. (OPTIONAL) Enter the keyword station-move to allow a station move on learned MAC addresses. Defaults On C-Series, the default behavior is no-station-move + static. On E-Series, the default behavior is station-move + static. "Static" means manually entered addresses, which do not age. Command Modes INTERFACE 618 | Layer 2