Dell Force10 S6000 Installation Guide - Page 11
Physical Dimensions, Switch Ports, Determine Switch Status, LED Displays, Dell Networking OS
View all Dell Force10 S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
• Temperature monitoring • Software-readable thermal monitor • Real time clock (RTC) support • Hot-plugging redundant power supply • Current monitoring for power management • Removable fan that you can manage • Standard 1U switch high Physical Dimensions The S6000 has the following physical dimensions: • 434 x 460 x 43.5 mm (W x D x H) • 17.09 x 18.11 x 1.71 inches (W x D x H) Switch Ports The following is a list of the standard ports located on each S6000 switch: • Serial RS-232 port (RJ-45 type) • Out of band (OOB) Ethernet management port (RJ-45 type) • Thirty-two 40Gbps QSFP+ ports • One universal serial bus port (USB Type-A) Determine Switch Status You can view S6000 status information in several ways, including LEDs and boot menu options. Also, you can view status information through the CLI show commands and with simple network management protocol (SNMP) traps. For more information about these options, refer to the Dell Networking OS Command Line Reference Guide for the S6000 Switch and the Dell Networking OS Configuration Guide for the S6000 Switch. LED Displays As shown in Figure 2-3, the S6000 includes LED displays on both the I/O and PSU side of the switch. Table 2-1 through Table 2-3 list the LED definitions for the S6000 switch. This includes the system, PSU, and fan status. The S6000 Switch | 11