Dell Inspiron 14 1440 Inspiron 14 1440 Service Manual - Page 42
System Board - inspiron 14 ()
View all Dell Inspiron 14 1440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Back to Contents Page System Board Dell™ Inspiron™ 1440 Service Manual Removing the System Board Replacing the System Board Entering the Service Tag in the BIOS WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. Removing the System Board 1. Follow the procedures in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the module cover (see Removing the Module Cover). 4. Remove the memory module(s) (see Removing the Memory Module(s)). 5. Remove the hard drive (see Removing the Hard Drive). 6. Remove the optical drive (see Removing the Optical Drive). 7. Remove the Mini-Card (see Removing the Mini-Card). 8. Remove the center control cover (see Removing the Center Control Cover). 9. Remove the keyboard (see Removing the Keyboard). 10. Remove the power button board (see Removing the Power Button Board). 11. Remove the palm rest (see Removing the Palm Rest). 12. Remove the Bluetooth card (see Removing the Bluetooth Card). 13. Disconnect the speakers cable and the USB board cable from their respective system board connectors. 14. Remove the three screws that secure the system board to the computer base. 1 screws (3) 2 system board 15. Lift the system board to disconnect the system board from the connector on the daughter board.