Dell Inspiron 14 1440 Inspiron 14 1440 Service Manual - Page 9

Back to Contents Page Camera (Optional) Dell™ Inspiron™ 1440 Service Manual Removing the Camera Replacing the Camera WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. Removing the Camera 1. Follow the procedures in Before You Begin. 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Disconnect the camera cable from the connector on the camera module. 5. Release the camera module from the latches on the display cover. 6. Remove the camera module. 1 latches (2) 3 camera module 2 camera cable connector Replacing the Camera 1. Secure the camera module using the latches on the display cover. 2. Connect the camera cable to the connector on the camera module.