Dell Inspiron 16 5635 Owners Manual - Page 52

Coin-cell battery, Removing the coin-cell battery

Get Dell Inspiron 16 5635 PDF manuals and user guides View all Dell Inspiron 16 5635 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Steps 1. Using the alignment posts, place the speakers on the palm-rest and keyboard assembly. 2. Ensure that the alignment posts are routed through the rubber grommets on the speaker. Note 3. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 4. Adhere the tapes to secure the WLAN cable to the system board. 5. Connect the keyboard cable to the system board and close the latch. 6. Connect the touchpad cable to the system board and close the latch. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Coin-cell battery Removing the coin-cell battery Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer. The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the removal procedure. 52 Removing and installing Field Replaceable Units (FRUs)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Steps
1.
Using the alignment posts, place the speakers on the palm-rest and keyboard assembly.
2.
Ensure that the alignment posts are routed through the rubber grommets on the speaker.
Note
3.
Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
4.
Adhere the tapes to secure the WLAN cable to the system board.
5.
Connect the keyboard cable to the system board and close the latch.
6.
Connect the touchpad cable to the system board and close the latch.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Coin-cell battery
Removing the coin-cell battery
Prerequisites
CAUTION:
The information in this section is intended for authorized service technicians only.
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
About this task
NOTE:
Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer.
The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the removal
procedure.
52
Removing and installing Field Replaceable Units (FRUs)