Dell Inspiron 16 5635 Owners Manual - Page 60
Installing the power button, Prerequisites
View all Dell Inspiron 16 5635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Installing the power button Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the power button and provides a visual representation of the installation procedure. Steps 1. Place the power button on the palm-rest and keyboard assembly. 2. Place the power-button board on the power button. 3. Align the screw holes on the power-button board with the screw holes on the palm-rest and keyboard assembly. 4. Replace the two screws (M2x3) to secure the power-button board to the palm-rest and keyboard assembly. 5. Connect the power-button board cable to I/O board and close the latch. 6. Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the palm-rest and keyboard assembly. 7. Replace the two screws (M2.5x5) to secure the left display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 60 Removing and installing Field Replaceable Units (FRUs)