Dell Inspiron Mini 10 1010 Service Manual - Page 25

Removing the Mini-Card, Replacing the Mini-Card

Get Dell Inspiron Mini 10 1010 PDF manuals and user guides View all Dell Inspiron Mini 10 1010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

l Mobile Broadband or Wireless Wide Area Network (WWAN) Removing the Mini-Card 1. Follow the instructions in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the keyboard (see Removing the Keyboard). 4. Disconnect the antenna cables from the Mini-Card. 1 Mini-Card 2 screws (2) 3 antenna cable connector (2) 5. Release the Mini-Card by removing the two screws that secure the Mini-Card to the system board. 6. Lift the Mini-Card out of its system board connector. CAUTION: When the Mini-Card is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge" in the safety instructions that shipped with your computer). Replacing the Mini-Card CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. CAUTION: To avoid damage to the Mini-Card, never place cables under the card.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
l
Mobile Broadband or Wireless Wide Area Network (WWAN)
Removing the Mini-Card
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Disconnect the antenna cables from the Mini-Card.
5.
Release the Mini-Card by removing the two screws that secure the
Mini-Card to the system board.
6.
Lift the Mini-Card out of its system board connector.
Replacing the Mini-Card
1
Mini-Card
2
screws (2)
3
antenna cable connector (2)
CAUTION:
When the Mini-Card is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge"
in the safety instructions that shipped with your computer).
CAUTION:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system
board, and realign the card.
CAUTION:
To avoid damage to the Mini-Card, never place cables under the card.