Dell Inspiron Mini 1012 Service Manual - Page 24
Hinge Cover
View all Dell Inspiron Mini 1012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Back to Contents Page Hinge Cover Dell™ Inspiron™ 1012 Service Manual Removing the Hinge Cover Replacing the Hinge Cover WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. Removing the Hinge Cover 1. Follow the procedures in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the two screws that secure the hinge cover to the computer base. 4. Use a plastic scribe to gently pry the hinge cover up. 5. Rotate to disengage the hinge cover tabs from the computer base. 1 plastic scribe 2 hinge cover