Dell Inspiron Mini 1012 Service Manual - Page 41
Power Button Board
View all Dell Inspiron Mini 1012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Back to Contents Page Power Button Board Dell™ Inspiron™ 1012 Service Manual Removing the Power Button Board Replacing the Power Button Board WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. Removing the Power Button Board 1. Follow the procedures in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the keyboard (see Removing the Keyboard). 4. Remove the hard-drive assembly (see Removing the Hard-Drive Assembly). 5. Remove the palm rest assembly (see Removing the Palm Rest Assembly). 6. Note the routing of the power button cable and remove the cable from the routing guide on the palm rest assembly. 7. Turn the palm rest assembly over and remove the screw that secures the power button board to the palm rest assembly. 1 power button board 3 power button cable 2 screw 8. Lift the power button board off the palm rest assembly. Replacing the Power Button Board 1. Follow the procedures in Before You Begin. 2. Place the power button board on the palm rest assembly and replace the screw that secures the power button board to the palm rest assembly. 3. Route the power button cable through the routing guide on the palm rest assembly. 4. Turn and replace the palm rest assembly (see Replacing the Palm Rest Assembly).