Dell Inspiron Mini 1012 Service Manual - Page 55
Video Accelerator Card
View all Dell Inspiron Mini 1012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Back to Contents Page Video Accelerator Card Dell™ Inspiron™ 1012 Service Manual Removing the Video Accelerator Card Replacing the Video Accelerator Card WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. NOTE: Dell does not guarantee compatibility or provide support for video accelerator cards from sources other than Dell. NOTE: Depending on the configuration of the computer when it was sold, the video accelerator card slot may or may not have a card installed. Removing the Video Accelerator Card 1. Follow the procedures in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the keyboard (see Removing the Keyboard). 4. Remove the hard-drive assembly (see Removing the Hard-Drive Assembly). 5. Remove the palm rest assembly (see Removing the Palm Rest Assembly). 6. Remove the processor heat sink (see Removing the Processor Heat Sink). CAUTION: When the video accelerator card is not in the computer, store it in protective antistatic packaging. For more information, see "Protecting Against Electrostatic Discharge" in the safety information that shipped with your computer. 7. Lift the video accelerator card out of the connector on the system board. 1 video accelerator card Replacing the Video Accelerator Card 1. Follow the procedures in Before You Begin. 2. Remove the new video accelerator card from its packaging.