Dell Inspiron Mini 9 910 Inspiron Mini 9 Service Manual - Page 26

3. Insert the Mini-Card at a 45-degree angle into the appropriate system board connector. For example, the WLAN card connector is labeled WLAN and so on. 4. Press the other end of the WLAN card down into the slot on the system board and replace the two securing screws. 5. Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for each MiniCard supported by your computer. Connectors on the Mini-Card WWAN (2 antenna cables) Antenna Cable Color Scheme Main WWAN (white triangle) white with gray stripe Auxiliary WWAN (black triangle) black with gray stripe WLAN (2 or 3 antenna cables) Main WLAN (white triangle) white Auxiliary WLAN (black triangle) WPAN (one antenna cable) black WPAN blue 6. Secure unused antenna cables in the protective mylar sleeve. 7. Replace the module cover (see Replacing the Module Cover). 8. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch to the lock position. 9. Install the drivers and utilities for your computer, as required. For more information, see the Dell Technology Guide. NOTE: If you are installing a communication card from a source other than Dell, you must install the appropriate drivers and utilities. For more information, see the Dell Technology Guide. Back to Contents Page