Dell Latitude D630 Service Manual - Page 30

Modem

Page 30 highlights

Back to Contents Page Modem Dell™ Latitude™ D630 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer (see Before Working Inside Your Computer). 1. Follow the instructions in Before You Begin. 2. Remove any installed media bay device (see Media Bay Devices). 3. Remove the hinge cover (see Hinge Cover). 4. Remove the keyboard (see Removing the Keyboard). 5. Remove the display assembly (see Display Assembly). 6. Remove the palm rest (see Palm Rest). 7. Remove the M2 x 3-mm screw that attaches the modem to the system board. 1 modem pull-tab 2 M2 x 3-mm screw 3 modem cable 8. Pull up on the pull-tab to disconnect the modem from the connector on the system board. NOTICE: Do not disconnect the modem cable from the system board. 9. Disconnect the modem cable from the modem. When replacing the modem, it is easier to connect the modem cable to the modem before you press the modem into the system board connector. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

Back to Contents Page
Modem
Dell™ Latitude™ D630 Service Manual
1.
Follow the instructions in
Before You Begin
.
2.
Remove any installed media bay device (see
Media Bay Devices
).
3.
Remove the hinge cover (see
Hinge Cover
).
4.
Remove the keyboard (see
Removing the Keyboard
).
5.
Remove the display assembly (see
Display Assembly
).
6.
Remove the palm rest (see
Palm Rest
).
7.
Remove the M2 x 3-mm screw that attaches the modem to the system board.
8.
Pull up on the pull-tab to disconnect the modem from the connector on the system board.
9.
Disconnect the modem cable from the modem.
When replacing the modem, it is easier to connect the modem cable to the modem
before
you press the modem into the system board connector.
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as a connector on the back of the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer (see
Before
Working Inside Your Computer
).
1
modem pull-tab
2
M2 x 3-mm screw
3
modem cable
NOTICE:
Do not disconnect the modem cable from the system board.