Dell Latitude D630 Service Manual - Page 5

Internal Card With Bluetooth, Wireless Technology

Page 5 highlights

Back to Contents Page Internal Card With Bluetooth® Wireless Technology Dell™ Latitude™ D630 Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer (see Before Working Inside Your Computer). If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed. To replace the internal card with Bluetooth wireless technology: 1. Follow the procedures in Before You Begin. 2. Remove the hinge cover (see Hinge Cover). NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components. 3. Remove the card cable from its routing guide. 1 connector wire 4 metal securing tab 2 plastic scribe 5 front plastic securing-tab 3 back plastic securing-tab 4. While grasping the card cable with one hand, press slightly downward on the back plastic securing-tab with a plastic scribe to release the cable end of the card. 5. Continue to grasp the card cable with one hand while prying the card out from underneath the metal tab with the other hand. 1 cable 4 metal tab 2 card connector 5 plastic scribe 3 card

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

Back to Contents Page
Internal Card With Bluetooth
®
Wireless Technology
Dell™ Latitude™ D630 Service Manual
If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.
To replace the internal card with Bluetooth wireless technology:
1.
Follow the procedures in
Before You Begin
.
2.
Remove the hinge cover (see
Hinge Cover
).
3.
Remove the card cable from its routing guide.
4.
While grasping the card cable with one hand, press slightly downward on the back plastic securing-tab with a plastic scribe to release the cable end of
the card.
5.
Continue to grasp the card cable with one hand while prying the card out from underneath the metal tab with the other hand.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as a connector on the back of the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer (see
Before
Working Inside Your Computer
).
NOTICE:
Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.
1
connector wire
2
plastic scribe
3
back plastic securing-tab
4
metal securing tab
5
front plastic securing-tab
1
cable
2
card connector
3
card
4
metal tab
5
plastic scribe