Dell Latitude E5450 Dell LatitudeE5450 / 5450 Owners Manual - Page 10
Installing the Battery, Removing the Hard-Drive Assembly, base cover
View all Dell Latitude E5450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
a. Remove the screws that secure the battery to the computer [1]. b. Lift and push to remove the battery from the computer [2] [3]. Installing the Battery 1. Insert the battery into its place on the computer. 2. Route the battery cable through its routing channel. 3. Tighten the screws to secure the battery to the computer. 4. Connect the battery cable to its connector on the system board. 5. Install the base cover. 6. Follow the procedures in After Working Inside Your Computer. Removing the Hard-Drive Assembly 1. Follow the procedure in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery 3. Perform the following steps: a. Disconnect the hard-drive cable from its connector on the system board [1] . b. Remove the screws that secure the hard-drive assembly to the computer [2]. 10