Dell Latitude E5450 Dell LatitudeE5450 / 5450 Owners Manual - Page 20
Installing the USH Board, Removing the Finger-Print Reader Board, palmrest, keyboard, keyboard trim
View all Dell Latitude E5450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing the USH Board 1. Place the USH Board on the palmrest. 2. Tighten the screw to secure the USH board to the palmrest. 3. Connect all the cables to the USH board. 4. Install the: a. palmrest b. keyboard c. keyboard trim d. hard-drive assembly e. battery f. base cover 5. Follow the procedures in After Working Inside Your Computer. Removing the Finger-Print Reader Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery c. keyboard trim d. keyboard e. palmrest 3. Perform the following steps to remove the finger-print reader board: a. Remove the screw to release the metal bracket that secures the finger-print reader board to the palmrest [1] [2]. b. Disconnect the finger-print reader cable from the finger-print reader board [3] [4]. c. Remove the finger-print reader board from the palmrest [5]. 20