Dell Latitude E5450 Dell LatitudeE5450 / 5450 Owners Manual - Page 27
Installing the Display-Hinge Brackets, Removing the Display Assembly
View all Dell Latitude E5450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing the Display-Hinge Brackets 1. Insert the display-hinge brackets into their slots on the computer. 2. Tighten the screws at the front and back of the computer to secure the display-hinge brackets. 3. Install the: a. palmrest b. keyboard c. keyboard trim d. hard-drive assembly e. memory f. battery g. base cover 4. Follow the procedures in After Working Inside Your Computer. Removing the Display Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery c. keyboard trim d. keyboard e. palmrest f. display-hinge brackets 3. Disconnect the WLAN and WWAN cables from their connectors [1] and release the cables through their routing channels [2]. 4. Perform the following steps to disconnect the display cable from the system board: a. Release the display cable from its routing channel [1]. b. Remove the screw that secures the display-cable bracket [2]. c. Remove the display-cable bracket to access the display cable [3]. 27