Dell Latitude E5450 Dell LatitudeE5450 / 5450 Owners Manual - Page 9
Installing the Base Cover, Removing the Battery, After Working Inside Your Computer, base cover
View all Dell Latitude E5450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
NOTE: You may need a sharp tool to pry the base cover from its edge. Installing the Base Cover 1. Place the base cover to align with the screw holders on the computer. 2. Tighten the screws to secure the base cover to the computer. 3. Follow the procedures in After Working Inside Your Computer. Removing the Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the base cover. 3. Disconnect the battery cable from its connector [1] and release the cable from its routing channel [2]. 4. Perform the following steps: 9
NOTE:
You may need a sharp tool to pry the base cover from its edge.
Installing the Base Cover
1.
Place the base cover to align with the screw holders on the computer.
2.
Tighten the screws to secure the base cover to the computer.
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
base cover
.
3.
Disconnect the battery cable from its connector [1] and release the cable from its routing channel [2].
4.
Perform the following steps:
9