Dell Latitude E5450 Dell LatitudeE5450 / 5450 Owners Manual - Page 23
Installing the power-connector port, battery, base cover, After Working Inside Your Computer
View all Dell Latitude E5450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4. Disconnect the power-connector port cable from its connector [1] and remove the powerconnector port from the computer [2]. Installing the power-connector port 1. Insert the power-connector port into its place on the computer. 2. Place the metal bracket on the power-connector port and tighten the screws to secure the power- connector port to the computer. 3. Route the power-connector port cable to its routing channels and connect the power-connector port cable to its connector on the system board. 4. Install the: a. battery b. base cover 5. Follow the procedures in After Working Inside Your Computer. 23
4.
Disconnect the power-connector port cable from its connector [1] and remove the power-
connector port from the computer [2].
Installing the power-connector port
1.
Insert the power-connector port into its place on the computer.
2.
Place the metal bracket on the power-connector port and tighten the screws to secure the power-
connector port to the computer.
3.
Route the power-connector port cable to its routing channels and connect the power-connector
port cable to its connector on the system board.
4.
Install the:
a.
battery
b.
base cover
5.
Follow the procedures in
After Working Inside Your Computer
.
23