Dell Latitude E5450 Dell LatitudeE5450 / 5450 Owners Manual - Page 36

Installing the Coin-cell Battery, Removing the System Board

Get Dell Latitude E5450 PDF manuals and user guides View all Dell Latitude E5450 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

3. Perform the following steps to remove the coin-cell battery from the computer: a. Peel the adhesive tape to access the coin-cell cable [1]. b. Disconnect the coin-cell cable from its connector on the system board [2]. c. Pry the coin-cell battery to remove it from the system board [3]. Installing the Coin-cell Battery 1. Insert the coin-cell battery into its place on the system board. 2. Connect the coin-cell battery cable to its connector on the system board. 3. Stick the adhesive tape to secure the coin-cell battery cable. 4. Install the: a. palmrest b. keyboard c. keyboard trim d. hard-drive assembly e. memory f. base cover 5. Follow the procedures in After Working Inside Your Computer. Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. SD card b. base cover c. battery d. memory e. hard-drive assembly f. keyboard trim g. keyboard h. palmrest i. display-hinge brackets 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
3.
Perform the following steps to remove the coin-cell battery from the computer:
a.
Peel the adhesive tape to access the coin-cell cable [1].
b.
Disconnect the coin-cell cable from its connector on the system board [2].
c.
Pry the coin-cell battery to remove it from the system board [3].
Installing the Coin-cell Battery
1.
Insert the coin-cell battery into its place on the system board.
2.
Connect the coin-cell battery cable to its connector on the system board.
3.
Stick the adhesive tape to secure the coin-cell battery cable.
4.
Install the:
a.
palmrest
b.
keyboard
c.
keyboard trim
d.
hard-drive assembly
e.
memory
f.
base cover
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
SD card
b.
base cover
c.
battery
d.
memory
e.
hard-drive assembly
f.
keyboard trim
g.
keyboard
h.
palmrest
i.
display-hinge brackets
36