Dell Latitude E5550 Dell LatitudeE5550 / 5550 Owners Manual - Page 11
Installing the Hard-Drive Assembly, Connect the hard-drive cable to its connector on the system board.
View all Dell Latitude E5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
6. Remove the screws that secure the hard-drive bracket to the hard drive [1] and remove the hard drive from the hard-drive bracket [2]. Installing the Hard-Drive Assembly 1. Place the hard-drive bracket on the hard drive to align the screw holders and tighten the screws to secure the hard-drive bracket. 2. Connect the hard-drive cable to its connector on the hard drive. 3. Place the hard-drive assembly into its slot on the computer. 4. Connect the hard-drive cable to its connector on the system board. 5. Tighten the screws to secure the hard-drive assembly to the computer. 6. Install the: 11
6.
Remove the screws that secure the hard-drive bracket to the hard drive [1] and remove the hard drive
from the hard-drive bracket [2].
Installing the Hard-Drive Assembly
1.
Place the hard-drive bracket on the hard drive to align the screw holders and tighten the screws to
secure the hard-drive bracket.
2.
Connect the hard-drive cable to its connector on the hard drive.
3.
Place the hard-drive assembly into its slot on the computer.
4.
Connect the hard-drive cable to its connector on the system board.
5.
Tighten the screws to secure the hard-drive assembly to the computer.
6.
Install the:
11