Dell Latitude E5550 Dell LatitudeE5550 / 5550 Owners Manual - Page 9
Installing the Battery, Removing the Hard-Drive Assembly, base cover
View all Dell Latitude E5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4. Perform the following steps: a. Remove the screw that secures the battery to the computer [1]. b. Lift and push to remove the battery from the computer [2] [3]. Installing the Battery 1. Insert the battery into its place on the computer. 2. Route the battery cable through its routing channel. 3. Tighten the screw to secure the battery to the computer. 4. Connect the battery cable to its connector on the system board. 5. Install the base cover. 6. Follow the procedures in After Working Inside Your Computer. Removing the Hard-Drive Assembly 1. Follow the procedure in Before Working Inside Your Computer. 2. Remove the: 9
4.
Perform the following steps:
a.
Remove the screw that secures the battery to the computer [1].
b.
Lift and push to remove the battery from the computer [2] [3].
Installing the Battery
1.
Insert the battery into its place on the computer.
2.
Route the battery cable through its routing channel.
3.
Tighten the screw to secure the battery to the computer.
4.
Connect the battery cable to its connector on the system board.
5.
Install the
base cover
.
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard-Drive Assembly
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the:
9