Dell Latitude E5550 Dell LatitudeE5550 / 5550 Owners Manual - Page 17
Installing the Power-Switch Board, Removing the SmartCard Reader Board, palmrest, keyboard
View all Dell Latitude E5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installing the Power-Switch Board 1. Place the power-switch board to its slot on the palmrest. 2. Tighten the screws to secure the power-switch board to the palmrest. 3. Install the: a. palmrest b. keyboard c. keyboard trim d. battery e. base cover 4. Follow the procedures in After Working Inside Your Computer. Removing the SmartCard Reader Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery c. memory d. keyboard trim e. keyboard f. palmrest 3. Perform the following steps: a. Disconnect the SmartCard reader board cable from the USH board [1] [2]. b. Peel the cable to release from the adhesive [3]. 17
Installing the Power-Switch Board
1.
Place the power-switch board to its slot on the palmrest.
2.
Tighten the screws to secure the power-switch board to the palmrest.
3.
Install the:
a.
palmrest
b.
keyboard
c.
keyboard trim
d.
battery
e.
base cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the SmartCard Reader Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
memory
d.
keyboard trim
e.
keyboard
f.
palmrest
3.
Perform the following steps:
a.
Disconnect the SmartCard reader board cable from the USH board [1] [2].
b.
Peel the cable to release from the adhesive [3].
17