Dell Latitude E5550 Dell LatitudeE5550 / 5550 Owners Manual - Page 22
Installing the LED Board, Removing the Power-Connector Port, palmrest, keyboard, keyboard trim
View all Dell Latitude E5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installing the LED Board 1. Insert the LED board into its slot on the palmrest. 2. Tighten the screw that secures the LED board to the palmrest. 3. Connect the LED-board cable to its connector on the LED board. 4. Install the: a. palmrest b. keyboard c. keyboard trim d. battery e. base cover 5. Follow the procedures in After Working Inside Your Computer. Removing the Power-Connector Port 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery 3. Disconnect the power-connector port cable from the system board [1] and release the powerconnector port cable from its routing channels [2]. 22
Installing the LED Board
1.
Insert the LED board into its slot on the palmrest.
2.
Tighten the screw that secures the LED board to the palmrest.
3.
Connect the LED-board cable to its connector on the LED board.
4.
Install the:
a.
palmrest
b.
keyboard
c.
keyboard trim
d.
battery
e.
base cover
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Connector Port
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
3.
Disconnect the power-connector port cable from the system board [1] and release the power-
connector port cable from its routing channels [2].
22