Dell Latitude E5550 Dell LatitudeE5550 / 5550 Owners Manual - Page 23
Installing the power-connector port, battery, base cover, After Working Inside Your Computer
View all Dell Latitude E5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4. Perform the following steps: a. Remove the screw to release the metal bracket on the power-connector port [1] [2]. b. Lift and remove the power-connector port from the computer [3]. Installing the power-connector port 1. Insert the power-connector port into its place on the computer. 2. Place the metal bracket on the power-connector port and tighten the screw to secure the power- connector port to the computer. 3. Route the power-connector port cable to its routing channels and connect the power-connector port cable to its connector on the system board. 4. Install the: a. battery b. base cover 5. Follow the procedures in After Working Inside Your Computer. 23
4.
Perform the following steps:
a.
Remove the screw to release the metal bracket on the power-connector port [1] [2].
b.
Lift and remove the power-connector port from the computer [3].
Installing the power-connector port
1.
Insert the power-connector port into its place on the computer.
2.
Place the metal bracket on the power-connector port and tighten the screw to secure the power-
connector port to the computer.
3.
Route the power-connector port cable to its routing channels and connect the power-connector
port cable to its connector on the system board.
4.
Install the:
a.
battery
b.
base cover
5.
Follow the procedures in
After Working Inside Your Computer
.
23