Dell Latitude E5550 Dell LatitudeE5550 / 5550 Owners Manual - Page 16

Installing the Palmrest, Removing the Power-Switch Board, keyboard, keyboard trim, battery, base cover

Get Dell Latitude E5550 PDF manuals and user guides View all Dell Latitude E5550 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

5. Push the palmrest to release and remove the palmrest from the computer [2]. Installing the Palmrest 1. Place the palmrest on the computer. 2. Connect the following cables to their connectors on the system board: a. power board b. LED board c. USH board d. touchpad board 3. Tighten the screws at the front and back of the computer to secure the palmrest. 4. Install the: a. keyboard b. keyboard trim c. battery d. base cover 5. Follow the procedures in After Working Inside Your Computer Removing the Power-Switch Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery c. keyboard trim d. keyboard e. palmrest 3. Perform the following steps to remove the power-switch board from the palmrest: a. Remove the screws that secure the power-switch board to the palmrest [1]. b. Remove the power-switch board from the palmrest [2]. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
5.
Push the palmrest to release and remove the palmrest from the computer [2].
Installing the Palmrest
1.
Place the palmrest on the computer.
2.
Connect the following cables to their connectors on the system board:
a.
power board
b.
LED board
c.
USH board
d.
touchpad board
3.
Tighten the screws at the front and back of the computer to secure the palmrest.
4.
Install the:
a.
keyboard
b.
keyboard trim
c.
battery
d.
base cover
5.
Follow the procedures in
After Working Inside Your Computer
Removing the Power-Switch Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
keyboard trim
d.
keyboard
e.
palmrest
3.
Perform the following steps to remove the power-switch board from the palmrest:
a.
Remove the screws that secure the power-switch board to the palmrest [1].
b.
Remove the power-switch board from the palmrest [2].
16