Dell M410HD User Guide - Page 15
Adjusting the Projected Image, Raising the Projector Height - fan
UPC - 884116026440
View all Dell M410HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3 To power off the projector quickly, press the Power button and hold for 1 second while the projector's cooling fans are still running. NOTE: Before you turn on the projector again, wait for 60 seconds to allow the internal temperature to stabilize. 4 Disconnect the power cord from the electrical outlet and the projector. Adjusting the Projected Image Raising the Projector Height 1 Press the Elevator button. 2 Raise the projector to the desired display angle, and then release the button to lock the elevator foot into position. 3 Use the tilt adjustment wheel to fine-tune the display angle. Lowering the Projector Height 1 Press the Elevator button. 2 Lower the projector, and then release the button to lock the elevator foot into position. 1 2 3 3 1 Elevator button 2 Elevator foot (Angle of tilt: 0 to 9.5 degree) 3 Tilt adjustment wheel Using Your Projector 15