Dell OpenManage Network Manager Dell OMNM Release Notes 5.2 SP1 - Page 12

12 Known Issues • M8428K does not display the correct model number, performance indicators and serial number in the details panel. (17447) • A limited amount of interface data is collected from Powerconnect B-Series Ethernet capable switches. As a result, interface reports and the Interfaces portlet do not contain Ethernet Link data for these devices. This also means Ethernet Links do not appear for these devices.(18800, 18802) • Right-click menu in Performance - Top Ping Response portlet does not appear. Workaround: Right-click in the Managed Resources portlet. (18827) • Network Details VLAN screen for B-RX devices does not display VLAN information since required MIBs are not supported or populated by the device. (16419) • Informs are not supported on these devices. If you check the checkbox to send informs to v3 trap recipients it will send informs rather that v3 traps. Workaround: Do not check the checkbox. (18435) • Deploying firmware to these devices requires an external file server. (12512) • Dell OMNM will not telnet connect to some devices if they use the factory default password. You must set the password to something other than that default. Dell OMNM does not recognize the additional prompt asking that default password be changed each time log in occurs. (12240)