Dell OptiPlex 5055 Tower OptiPlex 5055 Tower Owners Manual - Page 17
Removing 3.5-inch hard drive from the hard drive bracket
View all Dell OptiPlex 5055 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
NOTE: The tab may indicate 5.25 inch because you can also install a 5.25 inch hard drive in same drive bay. Removing 3.5-inch hard drive from the hard drive bracket 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Back cover b Front bezel c Hard drive assembly 3 To remove hard drive bracket: a Pull one side of the hard drive bracket to disengage the pins on the bracket from the slots on the hard drive [1]. b Lift the hard drive out of the hard drive bracket [2]. Disassembly and reassembly 17
NOTE:
The tab may indicate 5.25 inch because you can also install a 5.25 inch hard drive in same drive bay.
Removing 3.5–inch hard drive from the hard drive bracket
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
Back cover
b
Front bezel
c
Hard drive assembly
3
To remove hard drive bracket:
a
Pull one side of the hard drive bracket to disengage the pins on the bracket from the slots on the hard drive [1].
b
Lift the hard drive out of the hard drive bracket [2].
Disassembly and reassembly
17