Dell OptiPlex 5055 Tower OptiPlex 5055 Tower Owners Manual - Page 30
Removing intrusion switch, Installing intrusion switch
![]() |
View all Dell OptiPlex 5055 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Removing intrusion switch 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Back cover b Front bezel 3 Open the Front panel door. 4 To the intrusion switch: a Disconnect the intrusion switch cable from the connector on the system board [1]. b Un-route the intrusion switch cable from the cable holder. c Slide the intrusion switch and push it to remove from the computer [2]. Installing intrusion switch 1 Insert the intrusion switch into the slot on the computer. 2 Route the intrusion switch cable through the cable holder. 3 Connect the intrusion switch cable to the connector on the system board. 4 Close the front panel door. 30 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-5055-aseries-optiplex-5055-tower-owners-manual-17557df/30.png)
Removing intrusion switch
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
Back cover
b
Front bezel
3
Open the
Front panel door
.
4
To the intrusion switch:
a
Disconnect the intrusion switch cable from the connector on the system board [1].
b
Un-route the intrusion switch cable from the cable holder.
c
Slide the intrusion switch and push it to remove from the computer [2].
Installing intrusion switch
1
Insert the intrusion switch into the slot on the computer.
2
Route the intrusion switch cable through the cable holder.
3
Connect the intrusion switch cable to the connector on the system board.
4
Close the front panel door.
30
Disassembly and reassembly