Dell OptiPlex 5055 Tower OptiPlex 5055 Tower Owners Manual - Page 40

Installing the system fan, VGA Daughterboard, Removing the VGA daughter board

Get Dell OptiPlex 5055 Tower PDF manuals and user guides View all Dell OptiPlex 5055 Tower manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Installing the system fan 1 Insert the grommets into the slots on the chassis frame. 2 Hold the system fan with the cable facing the base of the computer. 3 Align the grooves of the system fan with the grommets on the chassis wall. 4 Pass the grommets through the corresponding grooves on the system fan. 5 Stretch the grommets and slide the system fan toward the computer until it locks into place. NOTE: Install the lower two grommets first. 6 Secure the intrusion switch cable to the system fan with an adhesive tape. 7 Connect the system fan cable to the connector on the system board. 8 Close the front panel door. 9 Install the: a Front bezel b Back cover 10 Follow the procedure in After working inside your computer. VGA Daughterboard Removing the VGA daughter board 1 Follow the procedure in Before Working Inside your Computer. 2 Remove the: a Back Cover b Bezel 3 Open the Front Panel Door 4 To remove the VGA daughter board: a Remove the screws that secure the VGA connector to the computer [1]. b Slide the VGA connector to release it from the computer [2]. c Remove the screw that secures the VGA daughter board to the computer [3]. d Lift the VGA daughter board using the handle to remove it from the computer [4]. 40 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Installing the system fan
1
Insert the grommets into the slots on the chassis frame.
2
Hold the system fan with the cable facing the base of the computer.
3
Align the grooves of the system fan with the grommets on the chassis wall.
4
Pass the grommets through the corresponding grooves on the system fan.
5
Stretch the grommets and slide the system fan toward the computer until it locks into place.
NOTE:
Install the lower two grommets
first.
6
Secure the intrusion switch cable to the system fan with an adhesive tape.
7
Connect the system fan cable to the connector on the system board.
8
Close the front panel door.
9
Install the:
a
Front bezel
b
Back cover
10
Follow the procedure in
After working inside your computer
.
VGA Daughterboard
Removing the VGA daughter board
1
Follow the procedure in
Before Working Inside your Computer
.
2
Remove the:
a
Back Cover
b
Bezel
3
Open the
Front Panel Door
4
To remove the VGA daughter board:
a
Remove the screws that secure the VGA connector to the computer [1].
b
Slide the VGA connector to release it from the computer [2].
c
Remove the screw that secures the VGA daughter board to the computer [3].
d
Lift the VGA daughter board using the handle to remove it from the computer [4].
40
Disassembly and reassembly