Dell OptiPlex 5055 Tower OptiPlex 5055 Tower Owners Manual - Page 36
Heat sink assembly, Removing heat sink assembly
![]() |
View all Dell OptiPlex 5055 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Heat sink assembly Removing heat sink assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Back cover b Front bezel 3 Open the Front panel door. 4 To remove the heat sink assembly: a Disconnect the heat sink assembly cable from the connector on the system board [1]. b Loosen the captive screws(6+/-1) that secure the heat sink assembly to the system board [2]. NOTE: Loosen the screws based on the numbers available on the system board. c Lift the heat sink assembly away from the computer [3]. 36 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-5055-aseries-optiplex-5055-tower-owners-manual-17557df/36.png)
Heat sink assembly
Removing heat sink assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
Back cover
b
Front bezel
3
Open the
Front panel door
.
4
To remove the heat sink assembly:
a
Disconnect the heat sink assembly cable from the connector on the system board [1].
b
Loosen the captive screws(6+/-1) that secure the heat sink assembly to the system board [2].
NOTE:
Loosen the screws based on the numbers available on the system board.
c
Lift the heat sink assembly away from the computer [3].
36
Disassembly and reassembly