Dell OptiPlex 5055 Tower OptiPlex 5055 Tower Owners Manual - Page 18
Removing 2.5–inch hard drive assembly, Installing 3.5-inch hard drive into the hard drive bracket
![]() |
View all Dell OptiPlex 5055 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing 3.5-inch hard drive into the hard drive bracket 1 Flex the side of the hard drive bracket, to align and insert the pins on the bracket into the hard drive. 2 Insert the hard drive into the hard drive bracket until it clicks into place. 3 Install the: a Hard drive assembly b Front bezel c Back Cover 4 Follow the procedure in After working inside your computer. Installing 3.5-inch hard drive assembly 1 Insert the hard drive assembly into the slot on the computer until it clicks into place. 2 Place the HDD filler brcaket. 3 Connect the SATA cable and the power cable to the connectors on the hard drive and re-route the cables along the caddy. 4 Install the: a Front bezel b Back cover 5 Follow the procedure in After working inside your computer. Removing 2.5-inch hard drive assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Back cover b Front bezel 3 Open the Front panel door. 4 To remove hard drive assembly: a Disconnect the hard drive's data and power cables from their respective connectors on the hard drive [1]. b Press the blue tabs on both sides [2] and pull the drive assembly out of the computer [3]. 18 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-5055-aseries-optiplex-5055-tower-owners-manual-17557df/18.png)