Dell OptiPlex 5055 Tower OptiPlex 5055 Tower Owners Manual - Page 25
FInstalling SD card reader, Memory modules, Removing memory module
![]() |
View all Dell OptiPlex 5055 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
FInstalling SD card reader 1 Insert the SD card reader into the slot on the system board. 2 Replace the screw(6+/-1) to secure the SD card reader to the front panel door. NOTE: The screw holder is beneath the SD card reader. 3 Connect the SD card reader cable to the connector on the system board. 4 Close the front panel door. 5 Install the: a Front bezel b Back cover 6 Follow the procedure in After working inside your computer. Memory modules Removing memory module 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Back cover b Front bezel 3 Open the Front panel door. 4 To remove the memory module: a Pull the clips securing the memory module until the memory module pops up. b Lift the memory module from the connector on the system board. Installing memory module 1 Align the notch on the memory module with the tab on the connector. 2 Insert the memory module into the connector. 3 Press the memory module until the memory module retention tabs click into place. 4 Close the front panel door. 5 Install the: a Front bezel b Cover 6 Follow the procedure in After working inside your computer. Disassembly and reassembly 25
![](/manual_guide/products/dell-optiplex-5055-aseries-optiplex-5055-tower-owners-manual-17557df/25.png)