Dell OptiPlex 5055 Tower OptiPlex 5055 Tower Owners Manual - Page 29
Installing power supply unit – PSU, Intrusion switch
![]() |
View all Dell OptiPlex 5055 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing power supply unit - PSU 1 Insert the PSU into the PSU slot and slide it toward the back of the computer until it clicks into place. 2 Replace the screws( 6+/-1) to secure the PSU to the computer. 3 Route the PSU cables through the retention clips. 4 Connect the PSU cables to the connectors on the system board. 5 Close the front panel door. 6 Install the: a Front bezel b Cover 7 Follow the procedure in After working inside your computer. Intrusion switch Disassembly and reassembly 29
![](/manual_guide/products/dell-optiplex-5055-aseries-optiplex-5055-tower-owners-manual-17557df/29.png)
Installing power supply unit – PSU
1
Insert the PSU into the PSU slot and slide it toward the back of the computer until it clicks into place.
2
Replace the screws( 6+/-1) to secure the PSU to the computer.
3
Route the PSU cables through the retention clips.
4
Connect the PSU cables to the connectors on the system board.
5
Close the front panel door.
6
Install the:
a
Front bezel
b
Cover
7
Follow the procedure in
After working inside your computer
.
Intrusion switch
Disassembly and reassembly
29