Dell OptiPlex 5055 Tower OptiPlex 5055 Tower Owners Manual - Page 41
Installing the VGA daughter board
View all Dell OptiPlex 5055 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installing the VGA daughter board 1 Align the VGA daughter board with the screw holder on the system board. 2 Tighten the screw to secure the VGA daughter board to the system board. 3 Insert the VGA connector into the slot at the back of the computer. 4 Tighten the screws to secure the VGA connector to the computer. 5 Close the Front Panel Door. 6 Install the: a Bezel b Back Cover 7 Follow the procedure in After working inside your computer. Disassembly and reassembly 41
Installing the VGA daughter board
1
Align the VGA daughter board with the screw holder on the system board.
2
Tighten the screw to secure the VGA daughter board to the system board.
3
Insert the VGA connector into the slot at the back of the computer.
4
Tighten the screws to secure the VGA connector to the computer.
5
Close the
Front Panel Door
.
6
Install the:
a
Bezel
b
Back Cover
7
Follow the procedure in
After working inside your computer
.
Disassembly and reassembly
41