Dell OptiPlex 5055 Tower OptiPlex 5055 Tower Owners Manual - Page 20
Optical drive, Removing optical drive
![]() |
View all Dell OptiPlex 5055 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing 2.5-inch hard drive into the hard drive bracket 1 Flex the side of the hard drive bracket, to align and insert the pins on the bracket into the hard drive. 2 Insert the hard drive into the hard drive bracket until it clicks into place. 3 Install the: a 2.5 inch hard drive assembly b Front bezel c Back cover 4 Follow the procedure in After working inside your computer. Installing 2.5-inch hard drive assembly 1 Insert the drive assembly into the slot on the computer until it clicks into place. 2 Close the front panel door. 3 Connect the SATA cable and the power cable to the connectors on the hard drive. 4 Install the: a Front bezel b Cover 5 Follow the procedure in After working inside your computer. Optical drive Removing optical drive 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Back cover b Front bezel 3 Open the Front panel door. 4 To remove optical drive assembly: a Disconnect the data cable and power cable from the connectors on the optical drive [1]. NOTE: You may need to unroute the cables from the tabs under the drive cage to allow you to disconnect the cables from the connectors. b Close the front panel door [2]. 20 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-5055-aseries-optiplex-5055-tower-owners-manual-17557df/20.png)