Dell OptiPlex 7010 Owner's Manual (Ultra Small Form Factor)
Dell OptiPlex 7010 Manual
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell OptiPlex 7010 manual content summary:
- Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 1
Dell OptiPlex 9010/7010 Ultra Small Form Factor Owner's Manual Regulatory Model: D01U Regulatory Type: D01U003 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 2
you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2012 Dell Inc. Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, Precision ON™,ExpressCharge™, Latitude™, Latitude ON™, OptiPlex™, Vostro™, and Wi-Fi Catcher - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 3
the Drive Cage...11 Removing the Optical Drive...12 Installing the Optical Drive...12 Removing the Hard Drive...12 Installing the Hard Drive...13 Removing the Intrusion Switch...13 Installing the Intrusion Switch...13 Memory Module Guidelines...14 Removing the Memory...14 Installing the Memory...15 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 4
or Changing an Existing System and/or Setup Password 43 Disabling a System Password...43 4 Diagnostics...45 Enhanced Pre-Boot System Assessment (ePSA) Diagnostics 45 5 Troubleshooting Your Computer 47 Power LED Diagnostics...47 Beep Code...48 Error Messages...48 6 Specifications...51 7 Contacting - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 5
only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 6
Shut Down. - In Windows XP: Click Start → Turn power button for about 6 seconds to turn them off. After Working Inside Your Computer After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer. 1. Replace Dell Diagnostics. 6 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 7
may require the following tools: • Small flat-blade screwdriver • Phillips screwdriver • Small plastic scribe Removing the Cover 1. Follow the procedures in Before Working Inside Your Computer. 2. Using a screw driver, turn the screw in an anti-clockwise direction. 3. Pull up the cover towards you - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 8
direction to secure the computer cover. 4. Follow the procedures in After Working Inside Your Computer. Removing the Front Bezel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Pry the front panel retention clips away from the chassis located at the side - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 9
of the front panel into the slots on the chassis. 2. Rotate the bezel toward the computer to engage the front panel retention clips until they click into place. 3. Install the cover. 4. Follow the procedures in After Working Inside Your Computer. Removing the Drive Cage 1. Follow the procedures in - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 10
4. Lift the drive cage using the handle and flip over the drive cage. 5. Lift the drive cage and remove the data cable and power cable from the back of the hard drive. 10 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 11
6. Remove the drive cage from the computer. Installing the Drive Cage 1. Place the drive cage on the edge of the computer near the front bezel to allow access to the cable connectors on the hard drive. 2. Connect the data cable and power cable to the back of the hard drive. 3. Flip over the drive - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 12
in After Working Inside Your Computer. Removing the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Remove the screws that secure the hard drive to the drive cage. 4. Slide the hard drive to release it from the - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 13
drive into the hard-drive bracket. 2. Slide the hard drive back into the drive cage. 3. Tighten the screws to secure the hard drive to the drive cage. 4. Install the drive cage. 5. Install the front bezel. 6. Install the cover. 7. Follow the procedures in After Working Inside Your Computer. Removing - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 14
of the slowest installed memory module(s). Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Press down on the memory retention clips on each side of the memory modules, and lift the memory modules out of the - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 15
memory-card with the tab on the system-board connector. 2. Press down on the memory module until the release tabs spring back to secure it in place. 3. Install the drive cage. 4. Install the front bezel. 5. Install the cover. 6. Follow the procedures in After Working Inside Your Computer. Removing - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 16
bezel. 6. Install the cover. 7. Follow the procedures in After Working Inside Your Computer. Removing the System Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Disconnect and unthread the system-fan cable from the system board - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 17
the front bezel. 7. Install the cover. 8. Follow the procedures in After Working Inside Your Computer. Removing the Speaker 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Disconnect the speaker cable from the system board. 17 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 18
4. Pull out the speaker cable from beneath the system fan cable and Wireless Local Area Network (WLAN) antennae (if installed). 5. Release the latch and rotate the speaker. 6. Remove the speaker from the chassis. 18 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 19
the front bezel. 7. Install the cover. 8. Follow the procedures in After Working Inside Your Computer. Removing the Power Switch 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Disconnect the power-switch cable from the chassis. 19 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 20
Install the cover. 6. Follow the procedures in After Working Inside Your Computer. Removing the Input/Output(I/O) Panel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Release the power cable and I/O cable from the chassis clip. 20 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 21
. 5. Slide the I/O panel towards the left of the computer to release it and pull the I/O panel along with its cable out of the computer. 6. Remove the screws that secure the I/O panel to the frame. Installing the Input/Output(I/O) Panel 1. Align the Input/Output panel with the Input/Output frame and - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 22
Connect the Input/Output panel data cable to the system board. 5. Install the drive cage. 6. Install the front bezel. 7. Install the cover. 8. Follow the procedures in After Working Inside Your Computer. Removing the Power Supply Unit 1. Follow the procedures in Before Working Inside Your Computer - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 23
Remove the screws that secures the power supply to the chassis. 6. Slide the power supply inward and lift the power supply unit out of the computer. Installing the Power Supply Unit 1. Place the power supply in the chassis and slide outward to secure it. 2. Tighten the screws that secure the power - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 24
. 9. Install the cover. 10. Follow the procedures in After Working Inside Your Computer. Removing the Heat Sink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Disconnect the heat sink/fan assembly cable from the system board. 24 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 25
4. Press the release lever down and outward to release the fan retention hook. 5. Lift the top portion of the heat sink/fan assembly. 6. Loosen the captive screws that secure the heat sink/fan assembly to the system board. 7. Lift the heat sink/fan assembly, and remove it from the computer. 25 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 26
bezel. 7. Install the cover. 8. Follow the procedures in After Working Inside Your Computer. Removing the Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage d) heat sink 3. Press the release lever down and then move it outward - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 27
Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage d) system fan e) power supply f) heat sink g) processor h) memory i) input/output panel j) WLAN card k) speaker 3. Disconnect all the cables connected to the chassis. 4. Disconnect - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 28
5. Remove the screws that secure the system board to the chassis. 6. Remove the 7-mm hex screw from the system board. 28 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 29
7. Slide the system board towards the front of the computer and remove. 29 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 30
System Board Layout The following image displays the system board layout. 1. memory module connectors 2. internal speaker cable 3. USB audio connector 4. CPU fan connector 5. processor 6. system fan connector 7. password jumper 8. PCIe mini card 9. HDD_ODD power cable 10. real time clock reset - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 31
7. Install the memory. 8. Install the processor. 9. Install the heat sink. 10. Install the power supply. 11. Install the system fan. 12. Install the drive cage. 13. Install the front bezel. 14. Install the cover. 15. Follow the procedures in After Working Inside Your Computer. 31 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 32
32 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 33
drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can: • Access System Setup by pressing key • Bring up the one-time boot menu by pressing key The one-time boot menu displays the devices that you can boot from including the diagnostic option - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 34
Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date, Manufacture Date, and the Express Service Code. • Memory Information - Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode, Memory , and 64-Bit Technology. • Device Information - Displays SATA-0, - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 35
configured to support RAID mode. Allows you to enable or disable the various on-board drives: • SATA-0 • SATA-1 • SATA-2 • SATA-3 This field controls if the hard drive errors for the integrated drives are reported during system startup. This technology is part of the SMART (Self Monitoring Analysis - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 36
: • Enable Boot Support • Enable Rear Dual USB 2.0 Ports • Enable Rear Dual USB 3.0 Ports • Enable Front USB Ports NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings. Allows you to enable or disable various on-board devices. • Enable PCI Slot - This option is - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 37
access the Option Read Only Memory (OROM) configuration screens via hotkeys during boot. These settings prenvent access to the Intel RAID (CTRL+I) or Intel Management Engine BIOS Extension (CTRL+P/F12). • Enable - User may enter OROM configuration screens via the hotkey. • One-Time Enable - User can - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 38
Support Intel® SpeedStep™ C States Control Intel® TurboBoost™ Hyper-Thread Control Table 6. Power Management Option AC Recovery Auto On Time Deep Sleep Control Description Specifies whether the process will have one TurboBoost driver to increase the performance of the CPU or graphics processor. - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 39
, that displays the keystroke sequence required to enter the BIOS Boot Option Menu. • Enable F12 Boot Option menu - This option is enabled by default. Table 8. Virtualization Support Option Virtualization VT for Direct I/O Description This option specifies whether a Virtual Machine Monitor (VMM - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 40
a Measured Virtual Machine Monitor (MVMM) can utilize Displays the service tag of your computer. Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default. Controls the SERR message mechanism. This option is not set by default. Some graphics cards - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 41
update your BIOS (system setup), on replacing the system board or if an update is available. For notebooks, ensure that your computer battery is fully charged and connected to a power outlet 1. Restart the computer. 2. Go to support.dell.com/support/downloads. 3. If you have your computer's Service - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 42
to log on to the computer. To enter a system setup, press immediately after a power-on or reboot. 1. In the System BIOS or System Setup screen, select System Security and press . The System Security screen appears. 2. In the System Security screen, verify that Password Status is Unlocked - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 43
Status is Locked. To enter the System Setup, press immediately after a power-on or reboot. 1. In the System BIOS or System Setup screen, select System Security and press . The System Security screen is displayed. 2. In the System Security screen, verify that Password Status is Unlocked - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 44
10. Install the cover. 11. Follow the procedures in After Working on Your Computer. 12. Power-on the computer. 13. Go to the system setup, and assign a new system or setup password. See Setting up a System Password. 44 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 45
the computer terminal when the diagnostic tests are performed. 1. Power-on the computer. 2. As the computer boots, press the key as the Dell logo appears. 3. On the boot menu screen, select the Diagnostics option. The Enhanced Pre-boot System Assessment window is displayed, listing all devices - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 46
46 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 47
You can troubleshoot your computer using indicators like Diagnostic Lights, Beep Codes, and Error Messages during the operation of the computer. Power LED Diagnostics The power button LED located on the front of the chassis also functions as a bicolored diagnostic LED. The diagnostic LED is - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 48
error The floppy or hard drive cannot read the data. For the Windows operating system, run the chkdsk utility to check the file structure of the floppy or hard drive. For any other operating system, run the appropriate corresponding utility. Decreasing available memory One or more memory modules - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 49
, replace them. General failure The operating system is unable to carry out the command. This message is usually followed by specific information-for example, Printer out of paper. Take the appropriate action to resolve the problem. Hard-disk drive configuration error The hard drive failed - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 50
a memory module may be loose. WARNING: Dell's Disk Monitoring During initial startup, the drive detected possible error conditions. When your System has detected that drive [0/1] on computer finishes booting, immediately back up your data and replace your the [primary/secondary] EIDE hard drive - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 51
• Intel Core i5 series • Intel Core i7 series • Intel Pentium Dual Core series • Intel Celeron series NOTE: Intel Celeron series is only available for the Dell OptiPlex 7010. Total Cache Up to 8 MB cache depending on processor type Table 15. Memory Feature Type Speed Connectors: Desktop, Mini - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 52
System Information Feature System Chipset DMA Channels Interrupt Levels BIOS Chip (NVRAM) Table 20. Expansion Bus Feature Bus Type Bus Speed Table 21. Cards Feature PCI: Mini-Tower Desktop Small Form Factor Ultra Small Form Factor 52 Specification • Intel HD Graphics 2500/4000 (i3/i5/i7 DC/QC Intel - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 53
none none none up to one half-height card Specification two one one slim optical drive bay one slim optical drive bay 3.5-inch SATA drive bays two one one none 2.5-inch SATA drive bays two two two one Specification one microphone connector and one headphone connector one line-out connector and - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 54
Panel: 2 • 15-pin VGA connector • two 20-pin DisplayPort connectors NOTE: Available video connectors may vary based on the graphics card selected. Table 24. Internal Connectors Feature Specification PCI 2.3 data width (maximum) - 32 bits: Mini-Tower and Desktop one 120-pin connector Small - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 55
light Drive activity light Back of the computer: Specification White light - Solid white light indicates power-on state; blinking white light indicates sleep state of the computer. White light - Blinking white light indicates that the computer is reading data from or writing data to the hard drive - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 56
light on integrated network adapter Power supply diagnostic light light - A blinking yellow light indicates that network activity is present. Green light - The power supply is turned on and is functional. The power cable must be connected to the power 70 cm (16.42 inches) Desktop 36.00 cm (14.17 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 57
Table 28. Environmental Feature Temperature range: Operating Storage Relative humidity (maximum): Operating Storage Maximum vibration: Operating Storage Maximum shock: Operating Storage Altitude: Operating Storage Airborne contaminant level Specification 10 °C to 35 °C (50 °F to 95 °F) -40 °C to 65 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 58
58 - Dell OptiPlex 7010 | Owner's Manual (Ultra Small Form
Factor) - Page 59
for sales, technical support, or customer service issues: 1. Visit support.dell.com. 2. Verify your country or region in the Choose a Country/Region drop-down menu at the bottom of the page. 3. Click Contact Us on the left side of the page. 4. Select the appropriate service or support link based on
Dell OptiPlex 9010/7010 Ultra Small Form Factor
Owner's Manual
Regulatory Model: D01U
Regulatory Type: D01U003