Dell OptiPlex 7010 Owner's Manual (Ultra Small Form Factor) - Page 8
Installing the Cover, Removing the Front Bezel, After Working Inside Your Computer
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installing the Cover 1. Place the cover on the computer. 2. Slide the computer cover towards the front of the chassis until it is fully engaged. 3. Tighten the screw in clockwise direction to secure the computer cover. 4. Follow the procedures in After Working Inside Your Computer. Removing the Front Bezel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Pry the front panel retention clips away from the chassis located at the side edge of front bezel. 4. Pry the front bezel away from the computer to release the front bezel from the chassis. 8
Installing the Cover
1.
Place the cover on the computer.
2.
Slide the computer cover towards the front of the chassis until it is fully engaged.
3.
Tighten the screw in clockwise direction to secure the computer cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Front Bezel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Pry the front panel retention clips away from the chassis located at the side edge of front bezel.
4.
Pry the front bezel away from the computer to release the front bezel from the chassis.
8