Dell OptiPlex 7010 Owner's Manual (Ultra Small Form Factor) - Page 26
Installing the Heat Sink, Removing the Processor
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Lay the assembly with the fan facing downward, and with the thermal grease facing upward. Installing the Heat Sink 1. Place the heat sink into the chassis. 2. Tighten the captive screws to secure the heat sink to the system board. 3. Press the release lever down and inwards to secure the fan retention hook. 4. Connect the heat sink cable to the system board. 5. Install the drive cage. 6. Install the front bezel. 7. Install the cover. 8. Follow the procedures in After Working Inside Your Computer. Removing the Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage d) heat sink 3. Press the release lever down and then move it outward to release it from the retention hook that secures it. Lift the processor cover and remove the processor from its socket. 26