Dell OptiPlex 7010 Owner's Manual (Ultra Small Form Factor) - Page 19
Installing the Internal Speaker, Removing the Power Switch
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the Internal Speaker 1. Place the speaker on the appropriate location of the rear end of the chassis. 2. Rotate until the latch is secured in place. 3. Route the speaker cable beneath the system fan cable and Wireless Local Area network (WLAN) antennae (if installed). 4. Connect the speaker cable to the system board. 5. Install the drive cage. 6. Install the front bezel. 7. Install the cover. 8. Follow the procedures in After Working Inside Your Computer. Removing the Power Switch 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Disconnect the power-switch cable from the chassis. 19
Installing the Internal Speaker
1.
Place the speaker on the appropriate location of the rear end of the chassis.
2.
Rotate until the latch is secured in place.
3.
Route the speaker cable beneath the system fan cable and Wireless Local Area network (WLAN) antennae (if
installed).
4.
Connect the speaker cable to the system board.
5.
Install the drive cage.
6.
Install the front bezel.
7.
Install the cover.
8.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Power Switch
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
cover
b)
front bezel
c)
drive cage
3.
Disconnect the power-switch cable from the chassis.
19