Dell OptiPlex 7010 Owner's Manual (Ultra Small Form Factor) - Page 24
Removing the Heat Sink
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4. Connect the cables to the system board. 5. Install the heat sink. 6. Install the intrusion switch. 7. Install the drive cage. 8. Install the front bezel. 9. Install the cover. 10. Follow the procedures in After Working Inside Your Computer. Removing the Heat Sink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Disconnect the heat sink/fan assembly cable from the system board. 24
4.
Connect the cables to the system board.
5.
Install the heat sink.
6.
Install the intrusion switch.
7.
Install the drive cage.
8.
Install the front bezel.
9.
Install the cover.
10.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heat Sink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
cover
b)
front bezel
c)
drive cage
3.
Disconnect the heat sink/fan assembly cable from the system board.
24