Dell OptiPlex 7010 Owner's Manual (Ultra Small Form Factor) - Page 17
Installing the System Fan, Removing the Speaker
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
5. Remove the fan from the chassis. Installing the System Fan 1. Place the system fan in the chassis. 2. Tighten the screws that secure the fan to the chassis. 3. Thread the system fan connector cables to the chassis clips. 4. Connect the system fan cable to the system board. 5. Install the drive cage. 6. Install the front bezel. 7. Install the cover. 8. Follow the procedures in After Working Inside Your Computer. Removing the Speaker 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) front bezel c) drive cage 3. Disconnect the speaker cable from the system board. 17
5.
Remove the fan from the chassis.
Installing the System Fan
1.
Place the system fan in the chassis.
2.
Tighten the screws that secure the fan to the chassis.
3.
Thread the system fan connector cables to the chassis clips.
4.
Connect the system fan cable to the system board.
5.
Install the drive cage.
6.
Install the front bezel.
7.
Install the cover.
8.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Speaker
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
cover
b)
front bezel
c)
drive cage
3.
Disconnect the speaker cable from the system board.
17