Dell OptiPlex 7080 Tower Service Manual - Page 17
Disassembly and reassembly, Recommended tools, Screw List
View all Dell OptiPlex 7080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4 Disassembly and reassembly NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips #0 screwdriver ● Phillips #1 screwdriver ● Plastic scribe-Recommended for field technician Screw List The following table shows the screw list and the images for different components. NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 7. Screw list Component Front I/O bracket Screw type #6-32 Quantity 1 Image M.2 2230/2280 Solid-state drive M2x3.5 1 WLAN card M2x3.5 1 Power supply unit #6-32 3 Processor fan and heat-sink assembly #6-32 4 System board #6-32 8 M2x4 1 Disassembly and reassembly 17