Dell OptiPlex 7080 Tower Service Manual - Page 57

Table 8. Antenna-cable color scheme, Steps, Connectors on the wireless card, Antenna-cable color

Get Dell OptiPlex 7080 Tower PDF manuals and user guides View all Dell OptiPlex 7080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Steps 1. Connect the antenna cables to the WLAN card. The following table provides the antenna-cable color scheme for the WLAN card of your computer. Table 8. Antenna-cable color scheme Connectors on the wireless card Main (white triangle) Antenna-cable color White Auxiliary (black triangle) Black 2. Place the WLAN card bracket to secure the WLAN antenna cables. 3. Insert the WLAN card into the connector on the system board. 4. Replace the (M2x3.5) screw to secure the plastic tab to the WLAN card. Next steps 1. Install the powered GPU. NOTE: This step is required only if the system is configured with powered GPU. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Disassembly and reassembly 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
Steps
1.
Connect the antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme for the WLAN card of your computer.
Table 8. Antenna-cable color scheme
Connectors on the wireless card
Antenna-cable color
Main (white triangle)
White
Auxiliary (black triangle)
Black
2.
Place the WLAN card bracket to secure the WLAN antenna cables.
3.
Insert the WLAN card into the connector on the system board.
4.
Replace the (M2x3.5) screw to secure the plastic tab to the WLAN card.
Next steps
1.
Install the
powered GPU
.
NOTE:
This step is required only if the system is configured with powered GPU.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Disassembly and reassembly
57