Dell OptiPlex 7080 Tower Service Manual - Page 28
in. hard-drive assembly, Removing the 3.5-inch hard-disk drive assembly
![]() |
View all Dell OptiPlex 7080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Steps 1. Insert the hard-drive assembly into the slot on the computer until it clicks into place. 2. For 2.5-inch. hard-disk drive set as primary, connect the power cable and the blue hard-drive data cable to the connectors on the 2.5-inch hard-disk drive. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. 3.5 in. hard-drive assembly Removing the 3.5-inch hard-disk drive assembly Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 28 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-7080-tower-service-manual-35d168f/28.png)
Steps
1.
Insert the hard-drive assembly into the slot on the computer until it clicks into place.
2.
For 2.5-inch. hard-disk drive set as primary, connect the power cable and the blue hard-drive data cable to the connectors
on the 2.5-inch hard-disk drive.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
3.5 in. hard-drive assembly
Removing the 3.5-inch hard-disk drive assembly
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
28
Disassembly and reassembly