Dell OptiPlex 7080 Tower Service Manual - Page 29
Removing the 3.5-inch hard-disk drive bracket
View all Dell OptiPlex 7080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
About this task The following images indicate the location of the 3.5-inch hard-disk drive assembly and provides a visual representation of the removal procedure. Steps 1. Disconnect the data and power cables from the 3.5-inch hard-disk drive module. 2. Push the securing tab to release the hard-disk drive assembly from the chassis. 3. Remove the EMI shied from the front side of the chassis. 4. Slide the hard-disk drive assembly away from the chassis. Removing the 3.5-inch hard-disk drive bracket Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the 3.5-inch hard-disk drive assembly. Disassembly and reassembly 29
About this task
The following images indicate the location of the 3.5-inch hard-disk drive assembly and provides a visual representation of the
removal procedure.
Steps
1.
Disconnect the data and power cables from the 3.5-inch hard-disk drive module.
2.
Push the securing tab to release the hard-disk drive assembly from the chassis.
3.
Remove the EMI shied from the front side of the chassis.
4.
Slide the hard-disk drive assembly away from the chassis.
Removing the 3.5-inch hard-disk drive bracket
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
3.
Remove the
3.5-inch hard-disk drive assembly
.
Disassembly and reassembly
29