Dell OptiPlex 7080 Tower Service Manual - Page 85
System board, Removing the system board
![]() |
View all Dell OptiPlex 7080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
System board Removing the system board Prerequisites 1. Follow the procedure in before working inside your computer. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect the cables correctly after you replace the system board. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the memory module. 5. Remove the wireless. 6. Remove the M.2 2230 SSD/M.2 2280 SSD. 7. Remove the coin-cell battery. 8. Remove the graphics card/ powered graphical processing unit. 9. Remove the VR heatsink. 10. Remove the processor fan and heat-sink assembly. 11. Remove the processor. About this task The following images indicate the location of the system board and provides a visual representation of the removal procedure. Disassembly and reassembly 85
![](/manual_guide/products/dell-optiplex-7080-tower-service-manual-35d168f/85.png)