Dell OptiPlex 7080 Tower Service Manual - Page 24
Removing the 2.5-inch hard-disk drive bracket, About this task, Steps, Prerequisites
![]() |
View all Dell OptiPlex 7080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
About this task The following images indicate the location of the 2.5-inch hard-disk drive and provide a visual representation of the removal procedure. Steps 1. Disconnect the power cable and the black hard drive data cable from the connectors on the 2.5-inch hard-disk drive. NOTE: For secondary 2.5-inch hard-disk drive, the other end of the black hard-drive data cable is connected to the SATA1 and SATA2 connectors on the system board. 2. Press the release tabs on the hard-disk drive bracket and slide the hard-disk drive assembly out of the hard-disk drive bracket. 3. Lift the hard-disk drive assembly from the computer. NOTE: Note the orientation of the hard-disk drive so that you can replace it correctly. Removing the 2.5-inch hard-disk drive bracket Prerequisites 1. Follow the procedure in before working inside your computer. 24 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-7080-tower-service-manual-35d168f/24.png)