Dell OptiPlex 7080 Tower Service Manual - Page 32
Disassembly and reassembly, cables to the hard drive.
View all Dell OptiPlex 7080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Steps 1. Slide and insert the 3.5-inch hard-disk drive assembly into the hard-disk drive bracket. 2. Replace the EMI shield on the chassis. 3. Align the hard-disk drive assembly with the tabs on the chassis. 4. Route the power cable and the data cable through the routing guides on the hard-disk drive assembly and connect the cables to the hard drive. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. 32 Disassembly and reassembly
Steps
1.
Slide and insert the 3.5-inch hard-disk drive assembly into the hard-disk drive bracket.
2.
Replace the EMI shield on the chassis.
3.
Align the hard-disk drive assembly with the tabs on the chassis.
4.
Route the power cable and the data cable through the routing guides on the hard-disk drive assembly and connect the
cables to the hard drive.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
32
Disassembly and reassembly